{"product_id":"custom-ams-start-color-change-g-code-for-bambu-lab-x1c-p1s","title":"Custom Start \u0026 AMS Color-Change G-Code for Bambu Lab X1C \/ P1S (0.4 mm Nozzle)","description":"\u003cp\u003e\u003cstrong\u003eFull description \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stock nozzle wiping sequences leave a lot to be desired, so I tried to fix that.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe stock nozzle wiping sequences leave a lot to be desired, so I fixed them. This custom G-code replaces the stock start and filament-change scripts with a faster, cleaner start and a cleaner color-change sequence. It needs no printed attachments or aftermarket wipers, and it works with Bambu Studio and Orca Slicer. \u003cstrong\u003eIt works best with PLA.\u003c\/strong\u003e No more hot purge waste dragged across your bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee it in action:\u003c\/strong\u003e Watch the video for a demonstration.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat it does\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast start:\u003c\/strong\u003e The bed and nozzle heat at the same time, and the lengthy bed scraping and LiDAR scanning steps are skipped. You start printing sooner and the nozzle stays cleaner.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart nozzle parking:\u003c\/strong\u003e At the end of each print, the nozzle is parked a few centimeters closer to the front of the printer. When the printer homes at the start of the next print, the nozzle doesn’t drag across the wiper, which keeps filament from curling up onto the nozzle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom cooling routine:\u003c\/strong\u003e After an AMS color swap and purge, a custom filament cooling routine helps your filament snap cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurge chute taps:\u003c\/strong\u003e The additional purge chute taps mean dramatically fewer purge chute clogs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero hardware mods:\u003c\/strong\u003e There are no printed parts to clutter your toolhead. The only thing you need is a small piece of aluminum tape inside your purge chute to help the filament not stick to the side of the chute.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eRequirements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eBambu Lab X1C or P1S\u003c\/li\u003e\n\u003cli\u003e0.4 mm nozzle\u003c\/li\u003e\n\u003cli\u003eAMS unit installed\u003c\/li\u003e\n\u003cli\u003eBambu Studio or Orca Slicer (to use Orca Slicer, you can downgrade your printer firmware; check the \u003ca href=\"https:\/\/cosfilamentsupply.com\/pages\/printer-tips\" title=\"Printer tips page\" rel=\"noopener\" target=\"_blank\"\u003eprinter tips page\u003c\/a\u003e for steps on how to do this)\u003c\/li\u003e\n\u003cli\u003eSmall piece of aluminum tape for the purge chute\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eWhat you’ll receive\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eA zip file with three text files you copy into your slicer’s printer settings:\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003e\u003ccode dir=\"ltr\"\u003eMachine_Start.txt\u003c\/code\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ccode dir=\"ltr\"\u003eMachine_End.txt\u003c\/code\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ccode dir=\"ltr\"\u003eChange_Filament.txt\u003c\/code\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eA step-by-step installation guide (PDF)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended filament settings (nozzle temperature and max volumetric speed) are included in the guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul dir=\"ltr\"\u003e\n\u003cli\u003eThis is a digital product. Nothing will be shipped.\u003c\/li\u003e\n\u003cli\u003eDesigned for 0.4 mm nozzles only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks best with PLA.\u003c\/strong\u003e It’s compatible with a wide range of other filaments, but results may vary with different materials, temperatures, and build plates.\u003c\/li\u003e\n\u003cli\u003eUse at your own risk, and always watch the first print after changing any G-code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefunds:\u003c\/strong\u003e If the G-code doesn’t work with your setup, email \u003ca href=\"mailto:kyle@cosfilamentsupply.com\"\u003ekyle@cosfilamentsupply.com\u003c\/a\u003e within 14 days of purchase and we’ll sort it out or refund your order.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COS Filament Supply","offers":[{"title":"Default Title","offer_id":67934531256538,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/cosfilamentsupply.com\/products\/custom-ams-start-color-change-g-code-for-bambu-lab-x1c-p1s","provider":"COS Filament Supply","version":"1.0","type":"link"}